Report on the work performed. Industrial concrete floor - Warsaw, 8600 m2

Foundation slab, which is an industrial concrete floor for a parking lot, what should you pay attention to when making it? Waterproofing of industrial concrete floors. How to make?

What we did on this construction site:

  • construction of an industrial concrete floor.

Foundation slab, which is an industrial concrete floor for a parking lot, what should you pay attention to when making it?

A foundation slab that is used as an industrial concrete floor for parking lots must be constructed to the highest standards of safety, strength and durability.

That is why choosing the right material and method of making the base plate is so important. Below we present some of the most important factors that are worth paying attention to when performing it.

The foundation slab of parking lots must be able to withstand heavy loads and extreme weather conditions. Therefore, an industrial floor made of high-strength concrete should be made. Its exposure class should be appropriately high. This is very important, especially when the parking lot is located outdoors and exposed to rain, snow, frost or strong solar radiation.

Concrete industrial floor has difficult tasks to perform. Therefore, it should be properly reinforced. Reinforcement allows you to strengthen the structure, increasing its load-bearing capacity and resistance to external forces.

The foundation slab for parking lots should be of appropriate thickness to ensure adequate stability of the structure. Often the minimum board thickness is 20 cm, but in many cases a greater thickness may be needed, taking into account the expected loads.

Screeding concrete and industrial floors

Make sure that the surface of the foundation slab is as even as possible. This ensures greater safety and comfort of using the parking lot. An uneven surface can lead to damage to vehicles, but also increases the risk of accidents when, for example, a person trips over protruding edges in an industrial concrete floor.

One of the most important aspects to pay attention to when installing a concrete industrial floor foundation slab is ensuring proper water drainage. This protects the structure from damage caused by moisture and also prevents puddles from forming, which can lead to accidents.

Finally, remember to regularly inspect and maintain your concrete base. These activities are necessary to maintain the current efficiency and durability of the structure for many years. When it's time to make a concrete slab, use the services of concrete pumping.

To sum up, the selection and construction of a foundation slab for parking lots is a task that requires attention to detail and the use of appropriate materials. It is important to pay attention to factors such as material strength, reinforcement, slab thickness, surface evenness, and water drainage. All of this will impact the safety, performance and durability of the industrial concrete parking lot floor.

Industrial concrete floor Warsaw

Waterproofing of industrial concrete floors. How to make?

Hydroisolation of industrial concrete floors is an essential step to prevent the destructive effect of water on concrete.

Both water-induced wetting and waterlogging can cause serious damage, resulting in costly renovations or even replacement of the entire floor. However, this process can be complicated, which forces many companies to devote a lot of time and resources to properly perform this task. In this article we explain how to waterproof industrial concrete floors.

The choice of the appropriate waterproofing material depends on ttype of load that the resin floor is supposed to absorb. For example, in places with high mechanical loads, such as production halls, it is worth using polymer waterproofing masses based on epoxy or polyurethane resins, which are characterized by high mechanical resistance.

Surface preparation is an important stage that affects the durability and effectiveness of the waterproofing used. The surface of an industrial concrete floor should be carefully cleaned, all loose mortar and concrete removed, and any substances that may disturb the adhesion of the waterproofing layer.

Industrial concrete floor Warsaw

Application of a primer (primer) layer is a key step that helps create a stronger and more durable bond between the surface of polished concrete and the layer waterproofing. This layer not only provides better adhesion, but also increases the effectiveness and durability of the waterproofing.

The basic stage is, of course, applying the waterproofing layer itself. This process may involve additional hardening, and the composition of the material used often requires that the work be performed under specific atmospheric conditions (temperature, humidity). Please ensure that the layer is applied to the industrial concrete floor evenly over the entire surface, maintaining the thickness recommended by the manufacturer.

Once the waterproofing layer has been applied, quality checks should be carried out over the entire surface to ensure that the process was carried out correctly. Inspections should include checking for air bubbles and whether the layer is damaged or cracked. When it comes to safety, don't forget about safety barriers.

Waterproofing of industrial concrete floors is a key protection that protects the investment against the costly replacement of a damaged floor. Performing it correctly is the basis for long and trouble-free operation of such a surface.

Industrial concrete floor Warsaw

Work results:

  1. construction of industrial concrete floor - 8600 m2.
Blog
16 march 2024
Report on the work performed. Industrial concrete floor - Warsaw, 8600 m2
Foundation slab, which is an industrial concrete floor for a parking lot, what should you pay attention to when making it? Waterproofing of industrial concrete floors. How to make?
15 march 2024
Report on the work performed Resin floor - Gdańsk, 300 m2
What are polyurethane varnishes for resin floors used for? How to protect a resin floor from the sun?
12 march 2024
Report on the work completed Polished concrete - Warsaw, 200 m2
Polished concrete garage floor. Is this a practical solution? How to protect a polished concrete floor from absorbing various substances such as wine, juice and grease?
To blog →
Catalog of safety barriers
We sell high-quality safety barriers for warehouses and garages
DIY kit DPK50
DIY kit DPK50
Height 500 mm. Steel crossbar 50/100/150/200 mm. Post size 100x100 mm. Wall thickness 3 mm. Leg dimensions 180x180x10 mm.
Shelf corner ORL03
Shelf corner ORL03
Height 1200 mm. Product dimensions 200x200 mm. Wall thickness 5 mm. Weight 20 kg.
Straight arched barrier LGOR01
Straight arched barrier LGOR01
Pipe diameter 60 mm. Length 1000 mm, height 300 mm. Wall thickness 3 mm. Leg dimensions 120x120x10 mm. Weight 11 kg.
Arched three-sided barrier OPC03
Arched three-sided barrier OPC03
Pipe diameter 76 mm. Height 350 mm, width 900 mm, depth 500 mm. Column dimensions 600 mm. Wall thickness 3 mm. Leg dimensions 120x120x10 mm. Weight 22 kg.
Safety barriers are used to protect building structures from trucks and to protect and restrict the movement of workers. Barriers can be installed on many types of floors, such as industrial concrete floors, resin floors, polished concrete and others. Barriers can be installed both outdoors and indoors.